Explorer 60S

Undeground Diamond Core Drilling Rig


Explorer 60S Technical Characteristics

Explorer 60S is a full hydraulically operated drill rig for coring and drilling underground galleries and surfaces that can be designed with an Electrical Motor or Diesel Engine. It is manufactured in three different frames: fixed skid, three wheel trailer, and tractor undercarriage. The rotation unit is hydraulically regulated and maintains a continuous speed between 450 -1375 (RPM). Explorer 60S offers the capability of swinging aside the rotation head for hole cleaning and grouting equipment access during operations. The top of the feeding frame comes with hydraulic jacks for stabilization. It has a unique automatic hydraulic system that synchronizes the performance between the chuck and rod holder. Explorer 60S has optional accessories such as larger wireline hoist, two step hydraulic waterpump and a gearbox to reach higher torque.

DRILLING CAPABILITY
Diameter of Drill Rod
AWL
BWL
NWL
HWL
Depth (m)
1020
800
600
420
Depth (ft)
3346
2624
1968
1378

Note: Depending on ground parameters, drilling angles, or drilling equipment, these values may differ and are only given as a reference.

WIRELINE
Length (6mm rope)
600 m
1969 ft
Capabilities
Wireline Pull
Wireline Speed
Bare Drum
10,55 kN
2371 lbf
127 m/min
418 ft/min
Full Drum
2,63 kN
591 lbf
516 m/min
1696 ft/min
MAST AND FEED SYSTEM
Feed Length
1800 mm
Feed Speed
0,6 m/s
1,96 ft/s
Feeding and Pulling Force
121,6 kN
27335 lbf
Drilling Angle
(-90°) - (+90°)
POWER UNIT
Motor
Electrical
Diesel
400 V - 50 Hz
480 V - 60 Hz
177 hp
Power
90 kW
108 kW
122,4 (hp)
146,8 (hp)
Revolution
1500 rpm
1800 rpm
2000 rpm
HYDRAULIC SYSTEM
Main Pump
300 bar / 4351 psi
112 cc
300 bar / 4351 psi
112 cc
Service Pump 1**
160 bar / 2321 psi
36 cc
160 bar / 2321 psi
29 cc
Service Pump 2
160 bar / 2321 psi
16 cc
160 bar / 2321 psi
11 cc
Service Pump 3
160 bar / 2321 psi
4 cc
160 bar / 2321 psi
4 cc
ROTATION UNIT
Spindle Speed Range
450 - 1375 rpm
Max. Torque
1708 Nm
1261 lbft
Max. Torque HTG* (optional)
3230 Nm
4375 lbft
CHUCK JAW
Type
Hydraulic
Maximum Internal Diameter
102 mm
4.02 in
Holding Capacity
130 kN
29224 lbf
ROD HOLDER JAW SPECIFICATION
Type
Hydraulic
Maximum Internal Diameter
148 mm
5,83 in
Holding Capacity
100 kN
2248 lbf
WEIGHT VALUES
Weight Value
3900 kg
8598 lb
OPTIONAL EQUIPMENT
Wireline Cable
600 m / 1969 ft
800 m / 2625 ft
Extra Torque*
HTG
Water Pump
TRIQUA140

* Maximum torque might have reductions at maximum spindle speed.

** Water pump’s model

*** All weights values are approximations and are subject to change according to model and accessories.
SFS Teksomak has the right to make modifications without any notice.