Pathfinder 10

SURFACE DIAMOND CORE DRILL RIG



Pathfinder 10 Technical Characteristics

DRILLING CAPACITY
Diameter of Drill Rod BWL NWL HWL PWL
Hole Diameter (mm) 60 75,7 96 122,6
Depth (m) 1350 1000 600 350
Depth (ft) 4430 3280 1968 1148

These depth values are theoretical values. Drilling depth may vary according to ground conditions, equipment drilling angle, etc.

MAIN HOIST
Line Pull 89 kN 20000 lbf
Line Speed 55 m/min 180 ft/min
Cable Size 60 m * 16 mm 197 ft * 10/16 in
WIRELINE
  Capacity 1000 m with 6 mm of rope
Line Pull Bare Drum 14,30 kN 3215 lbf
Full Drum 2,02 kN 454 lbf
Line Speed Bare Drum 95 m/min 312 ft/min
Full Drum 676 m/min 2217 ft/min
MAST AND FEED SYSTEM
Feed Length 3,4 m 11,15 ft
Feed Speed Fast and slow with variable control
Feeding and Pulling Force 63 kN - 190 kN 14162 lbf - 42713 lbf
Drilling Angle 45 - 90 degrees
Rod Pull Length 7 m 23 ft
POWER UNIT
Brand VOLVO PENTA
Power 155 kW 210 Hp
Rev. 2000 rpm
Engine Type Diesel
Cooler Water Cooler and Intercool
HYDRAULIC SYSTEM
First Pump 260 bar / 3770 psi 140 cc/rpm
Second Pump 180 bar / 2610 psi 50 cc/rpm
Auxiliary Pump 200 bar / 2900 psi 32 cc/rpm
Hydraulic Oil Cooler Air  
UNIT AND SPINDLE SPEED
Gears Power Hydraulic Engine - Variable speed/reversible
Spindle Speed 1. 6,63:1 2. 2,62:1
1st Gear Speed (rpm) 73 - 98 185 - 247
Torque (Nm) 10672 - 7962 4217 - 3146
2nd Gear Speed (rpm) 131 - 176 324 - 434
Torque (Nm) 6083 - 4538 2404 -1793
3rd Gear Speed (rpm) 222 - 297 561 -751
Torque (Nm) 3513 - 2621 1388 - 1036
4th Gear Speed (rpm) 354 - 475 897 - 1200
Torque (Nm) 2196 - 1638 868 - 647
Range Selection Manual control from gearbox
Gearbox Hydraulic sliding
CHUCK JAW SPECIFICATION Type Hydraulic operated, spring closed
Maximum Inside Diameter 117 mm 4,61 in
Holding Capacity 18000 kg 39683 lb
ROD HOLDER JAW SPECIFICATIONS Type 2 lines of Hydraulic piston + drill rod removal
Maximum Inside Diameter 170 mm 6,69 in
Holding Capacity 20000 kg 44092 lb
MOVEMENT UNIT Regular skid frame, wheel, on truck and hydraulic crawler
SUPPORT JACKS Leverages of Jacks 4 units of Hydraulic Leverages
STANDARD EQUIPMENTS
Mast in two sections
Mast pulley
High torque gear
Safety sheet metals
4 units of hydraulic leverage
Fuel tank 157 lt (41,5 gal)
Oil tank 390 lt (103 gal)
Fuel filter
RPM Meter
WEIGHT VALUES
Weight Value 9000 kg 19841 lb
OPTIONAL EQUIPMENTS
Water flow meter
Hydraulic mud pump, TRIQUA140
Maximum flow 140 lt/min
Maximum pressure 60 bar / 870 psi
Hydraulic mud mixer

Pathfinder10 is full hydraulic drill rig for coring and drilling surface. It can be built on different frames such as regular skid frame, wheel, truck and hydraulic crawler. It has hydraulic regulated spindle to control speed of rotation between 73 rpm to 1200 rpm step less. The rotation head can be swung aside for hole cleaning or grouting equipment. Pathfinder10 has also optional accessories such as hydraulic mud mixer, water flow meter, hydraulic mud pump (140 lt/min), high torque, shock absorbent and second rod holder.
All weights values are approximations and are subject to change according to model and accessories.
SFS Teksomak has the right to make modifications without any notice.